Howto USB Boot a VM in VMware Workstation 11

VMware Workstation 11 does now support EFI boot configuration in the GUI which enables you to boot from an USB disk without workarounds. You do not have to edit vmx files or use workarounds like mounting USB drives as physical disk or booting with Plop Boot Manager.

  1. Open Edit virtual machine settings
  2. Select Options tab
  3. Open Advanced
  4. Enable Boot with EFI instead of BIOS
    enable-efi-boot-in-workstation11
  5. Click OK
  6. Power on the VM
  7. Rightclick the USB disk icon
    usb-disk-in-workstation11
  8. Select Connect (Disconnect from Host)
    connect-usb-device-to-vm
  9. Power off the VM
  10. Rightclick the VM and select Power > Power On to Firmware
    power-on-to-firmware
  11. Select EFI USB Device and press Enter
    Clipboard01

31 thoughts on “Howto USB Boot a VM in VMware Workstation 11”

        1. I am now able to see EFI USB Device in Boot manager. I had to plug the stick in USB 2 input. The Stick is USB 3 - should be backward compatible.

          Nothing happens after selecting EFI USB device. It comes back to same boot manager screen. When I hit enter key continuously, I see "unsuccessful" flashing in the background. Any suggestions are appreciated.

        1. fgrehl i'm asking.. i have a guarenteed efi disk and it wouldn't take it. I was finally able to get EFI usb device to show up but now it wont continue. Please just tell us what u used to test

    1. Because I think you are using USB 2.0 option in the Virtual machine options but your pendrive is USB3.0 or visa versa.. so, just check it once.

  1. This has not worked for me either. I have USB2 and USB3 bootable flash drives. I have the same experience as Muksha. In a USB3 port there is no "EFI USB Device" option. In a USB2 port the option is there but it never successfully boots off the usb. No error. Just keeps coming back to the same boot screen. Anyone get past this?

  2. Having same problem. I get the Blue Screen and select boot from USB but it doesn't work.
    Do we need a particular USB Boot disk format for this to Work?
    Thanks for sharing.

  3. Hi all, same as above with VMware Player 12 also.
    I tried with a new empty 64-bit VM and a 32-bit one as well, no changes. USB v2 of course. I used a Windows 10 DVD which boots on the physical machine to make the USB stick with Rufus. I believe the problem is the USB handling itself.
    Thanks in advance for helping.

  4. This is worked for me.I have searched many forum to for uefi usb booting but failed to get one. Thank you very much for such a good post.

  5. This procedure of the dual-boot of a VM, in order to boot from a USB device, can also be applied for the WS 12.x or it can be simplified with a single boot?

    Thanks

    Bye

  6. Thorsten Albrecht

    I'd like to confirm that this procedure works with Workstation 12.1.0 and a Windows 10 USB stick which I created with MediaCreationTool.exe from Microsoft on 6/6/2016 (Windows 10 b1115 (Build 10586.164)

    Thorsten

  7. Does this require the paid version of Workstation? I'm using a free version and I don't see an "Advanced" section under Options.

  8. Thanks for the info. Note that the 'right' USB icon (the one that the author did indicate with the red square) has to be clicked. For me it took 3 boots to realize that I was trying to boot from the Validity Sensor...

  9. Not having any luck with this on 11.1. The second you power down the VM, the USB connection is lost. Powering on from Firmware doesn't restore the USB connection. If I try and click the USB drive quickly to connect it while the EFI is booting, it just tells me the Connection was unsuccessful because the host was using it. After a minute or so, I can right click and connect, but the EFI is already booted, and there is no option to rescan the system (to see the now present USB as a boot option.)

  10. I have installed and I can run VMware 12.5 in LTS 16.04 Ubuntu. But network bridging does not work. When I connect VM interface to the bridged vmnet0 always get an error

  11. doesn't work VMware 15 pro, either. Can get the USB device to show up in the bios, but once you hit enter on it, it just blinks back to the same screen. The USB stick is formatted bootable and works with oracle. Not sure why vmware has problems.

  12. It's work in VMWare Workstation 15.5.
    Configure VM firmware type: UEFI first.
    Then Power On to Firmware, then connect USB stick to VM.
    If EFI USB device not shown, press Ctrl-Alt-Insert in VM for reboot.
    Press ESC key when shown VMWARE logo, EFI USB device should shown now if USB is connected to VM and UEFI firmware detected it.

Leave a Reply to Thorsten Albrecht Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.