VMware ESXi SCSI Sense Code Decoder

SCSI errors or warnings in ESXi are displayed with 6 status codes. This page converts these sense codes from ESXi Hosts to human readable status information. In the vmkernel.log system log file from an ESXi 5.x or 6.0 hosts, you see entries similar to the following. Enter the colored numbers to the form and press Submit:

ScsiDeviceIO: [...] Cmd 0x1a [...] to dev "naa.x" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

H:0x   D:0x   P:0x    Sense data: 0x   0x   0x
(Optional: Cmd 0x )
      


Show me an example for H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

54 thoughts on “VMware ESXi SCSI Sense Code Decoder”

  1. Pingback: New Tool: Decoder for ESXi SCSI Sense Codes | Virten.net

  2. Excellent Tool, if we can get some information about how communication happens from ESXi host to Storage from logs that would be great, what command ESXi sends to Storage first and then what commands will be running on ESXi host when I/O is happening would be great.

    1. Do you have Logs that you want to understand? If yes, feel free to provide.
      You do not see each SCSI command in the log. This would be way to much. There are physical appliances in the market that you can put between your server and the storage array to capture all traffic. But these appliances are very rare and require very deep protocol knowledge.

      From the ESXi log you usually only see datastore heartbeat and failed commands.

  3. Love this tool! I use the heck out of it, If you ever get the chance to add a 'clear all fields' button that would be great, it would allow batch work to be done quicker, Thanks for the great tool!

      1. Thank you! Very nice! Is there a way to enter the CMD into the virten2 strings? I love the full line entry but still flip between the two for the Command output.

        1. Sure. You should be able to add full vmkernel.log lines now. Example:

          2018-02-27T11:51:31.001Z cpu3:65559)ScsiDeviceIO: 2948: Cmd(0x439500ac0f80) 0x1a, CmdSN 0x197347 from world 0 to dev "mpx.vmhba32:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

          http://www.virten.net/vmware/vmware-esxi-scsi-sense-code-decoder-v2/?scsiCode=2018-02-27T11%3A51%3A31.001Z+cpu3%3A65559%29ScsiDeviceIO%3A+2948%3A+Cmd%280x439500ac0f80%29+0x1a%2C+CmdSN+0x197347+from+world+0+to+dev+%22mpx.vmhba32%3AC0%3AT0%3AL0%22+failed+H%3A0x0+D%3A0x2+P%3A0x0+Valid+sense+data%3A+0x5+0x24+0x0.

          Please let me know if there are any issues.

    1. I ignore all sense code messages by default but watch them when I know that there is an issue. It's usually specific to a single platform, so not generally speaking. When you have storage issues, the sense code might help you when looking for the root cause. When you have a storage issue (for example a disconnected datastore) you will be noticed anyway.

Leave a Reply to Shekhar Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.